VorTek SonoPro Professional S36 Series, Instruction Manual

Page: 30 / 108

Series S36 Instruction Manual Chapter 2 Installation
800120 2-18
12. Repeat Steps 10-11 for installing the three remaining screws. The assem-
bly should resemble that of Figure 2-22.
Figure 2-22. Mounting Bracket with All Screws Attached
13. Now that all hardware is installed and hand tight, go to each screw and
tighten down fully using an 9/64-inch Allen wrench and an 11/32-inch
wrench.
14. The enclosure is now fully attached to the mounting bracket and therefore
to the pipe. The assembly should resemble that of Figure 2-23. The lid can
be closed and reattached to the bottom half of the enclosure or the lid can
be left open to complete the wiring which is described in the next section.
Figure 2-23. Enclosure with Pipe Mounting Bracket