voptech IP20, User Manual

Page: 71 / 85

Encrypt Key Configuration file is encrypted.
Save Autoprovision
Information Save the username and password authentication
message of http/https/ftp and input ID message in the
phone until the url in the server changes.
DHCP Option
Setting
DHCP Option
Setting Specify DHCP Option. DHCP option supports DHCP
custom option and DHCP option 66 and DHCP option
43 to obtain the parameters. You could choose one
method among them; the default is DHCP option
disable.
Custom DHCP
Option A valid Custom DHCP Option is from 128 to 254. The
Custom DHCP Option must be in accordance with the
one defined in the DHCP server.
Plug and Play
Enable PnP Enable PnP by selecting it, than the phone will send
SIP SUBSCRIBE messages to a multicast address
when it boots up. Any SIP server understanding that
message will reply with a SIP NOTIFY message
containing the Auto Provisioning Server URL where
the phones can request their configuration.
PnP Server Specify the PnP Server.
PnP Port Specify the PnP Server.
PnP Transport Specify the PnP Transfer protocol.
PnP Interval Specify the Interval time, unit is hour.
Phone Flash
Server Address Set FTP/TFTP/HTTP server IP address for auto
update. The address can be IP address or Domain
name with subdirectory.
Config File Name Set configuration file’s name which need to update.
System will use MAC as config file name if config file
name keep blank. For example, 000102030405.
Protocol Type Specify the Protocol type FTP, TFTP or HTTP.
Update Interval Specify update interval time, unit is hour.
Update Mode Different update modes:
1. Disable: means no update.
2. Update after reboot: means update after reboot.
3. Update at time interval: means periodic update.
TR069 Settings
Enable TR069 Enable TR069 by selecting it.
ACS Server Type Specify the ACS Server Type.
ACS Server URL Specify the ACS Server URL.
ACS User Specify ACS User.
ACS Password Specify ACS Password.