Fanvil endpoint supports PnP and DHCP and Phone Flash to obtain the
parameters. The PnP and DHCP and Phone Flash are all deployed, endpoint
will go by the following process to try to obtain the server address and other
parameters, when it boots up:
DHCP option
PnP server
Phone Flash
Auto Provision
Field name
explanation
Auto Provision
Setting
Current Config
Version
Show the current config file’s version. If the version
of the configuration downloaded is higher than the
version of the running configurations, the auto
provision would upgrade, or stop here. If the endpoints
confirm the configuration by Digest method, the
endpoints wouldn’t upgrade configuration unless the
configuration in the server is different with the
running configuration.
Common Config
Version
Show the common config file’s version. If the
configuration downloaded and the running
configurations are the same, the auto provision would
stop here. If the endpoints confirm the configuration
by Digest method, the endpoints wouldn’t upgrade
configuration unless the configuration in the server is
different with the running configuration.
CPE Serial Number Show CPE Serial Number.
User
Specify FTP/HTTP/HTTPS server Username. System
will use anonymous if username keep blank.
Password
Specify FTP/HTTP/HTTPS server Password.
Config Encrypt Key Input the Encrypt Key, if the configuration file is
encrypted.
Common Config
Input the Common Encrypt Key, if the Common
Summary of Contents for IP20
Page 1: ...User Manual IP20 IP20P ...
Page 43: ......
