voptech C2W User Manual Download Page 35

Page: 35 / 41

WiFi SIP Phone C2W User Manual

4.7.2

LDAP

Enable LDAP: Select “Yes” or “No” to enable or disable LDAP.

LDAP Name Filter: Set the name of the LDAP search attributes.

LDAP Number Filter:Set the number of the LDAP search attributes.

Server Address:Set the LDAP server domain name or IP address.

Port:Set the LDAP server port number.Defauts to 389.

Base:Set the LDAP search base.

Username:Set the LDAP server username.

Password: Set the LDAP server password.

Max Hits(1~32000): Set the maximum number of search results from the LDAP server.

10.

LDAP Name Attributes: Set the name of the attributes returned from the server.

11.

LDAP Number Attributes:Set the number of the attributes returned from the server.

12.

LDAP Display Name: The contact record the name of the displayed on the LCD.

13.

Protocol: Set the phone to support LDAP protocol version.Defauts to version 3.

14.

LDAP Lookup For Incomining Call: Set the phone for LDAP search when incoming call.

15.

LDAP Lookup For Callout: Set the phone for LDAP search when dialing,

16.

LDAP Sorting Results: Set the phone to sort the search results.

Summary of Contents for C2W










































Search results

Summary of Contents for C2W

Reviews:

Related manuals for C2W

Brands by name

Popular brands

voptech C2W, User Manual

Search results

Summary of Contents for C2W

Reviews:

Related manuals for C2W

Brands by name

Popular brands