WiFi SIP Phone C2W User Manual
31
9.
Outbound Proxy Server
:
Set address of Outbound proxy server. All signaling requests will be
sent to outbound proxy server firstly.
10.
Outbound Proxy Port: Outbound proxy server port.
11.
Local SIP Port: Set the local SIP port.
12.
Register Expires: Register expiration time, defaults to 300 seconds.
13.
Subscribe Expires: Subscriber expiration time, defaults to 3600 seconds.
14.
Transport Type: UDP/TCP/TLS. Defaults to UDP.
15.
SIP 100Rel Require: Select “Yes” or “No” to enable or disable 100Rel. If enabled, 100rel
parameters will be added to the SIP request to support PRACK.
16.
Rport Enable: Select “Yes” or “No” to enable or disable Rport.
17.
Session Timer Enable
:
Select “Yes” or “No” to enable or disable Session Timer.
18.
Early Update Enable
:
Select “Yes” or “No” to enable or disable Early Update.
19.
Caller ID Display: Select “Yes” or “No” to enable or disable Caller ID display
20.
AutoSubscribeMWIEnable
:
Select “Yes” or “No” to enable or disable SubscribeMWI
21.
Server List
:
Choose the server type.
22.
DNS Mode: Choose the DNS mode
23.
BLF List URI: Set BLF list URI when C2W cooperates with Broadworks (Broadsoft).
24.
NAT Mapping Enable: Select “Yes” or “No” to enable or disable NAT Mapping.
Codec Configuration
1.
Disabled Codecs: The codecs in this frame are disabled, choose one and then click
to
enable the specified codec.
2.
Enabled Codecs: The codecs in this frame are enabled, the uppermost codec has the