DVR User Manual
41
Advance settings are as follows:
Step 1: Enter into Menu
Setup
P.T.Z
Advanced tab. Refer to Fig 4-38:
Step 2: In the Advanced tab, click preset “Setting” button to see a dialog box as Fig 4-39:
Fig 4-38 P.T.Z Configuration-Advanced Fig 4-39 Advanced-Preset Setting
Step 3: In the preset setting tab, while clicking Setting button, a dialog will pop-up as Fig 4-40:
User can control the dome by rotating up, down, left, right and adjust the
rotating speed zoom, focus and iris of the dome;
Select the serial number of the preset point. Click
button to enable
the PTZ wiper and click
button to enable the PTZ light.
Fig 4-40 Preset Setting-Setting
Note:
Only when the PTZ supports wiper and light, can these two functional
buttons take effect. At the same time these two buttons are only available
when PELCOP or PELCOD is selected.
Click Save button to save the settings, click
icon to hide the tool
bar, right-key can remerge it; click
icon to exit the current interface.
In the preset tab, click OK button to save the setting; click Exit button to
exit the current interface.
Fig 4-41 Cruise Setting
VOOK