DVR User Manual
24
Step2: Checkmark record and audio.
Step3: Select All to setup the same settings for all channels.
4.3.2 Record Stream
Step1: Enter into Menu
Setup
Record
Record Bitrate tab. Refer to Fig 4-12:
Step2: Setup rate, resolution, quality, encode and max bit stream.
Step3: Select “All” to set the same settings for all channels.
Step4: Click “Default” button to restore default setting; click “Apply” button to save the setting; click “Exit” button to exit the current
interface.
Note:
If the rate value set is over high the maximum resources of the device, the value will be adjusted automatically.
Fig 4-12 Record Configuration-Record Bit rate
4.3.3 Time
Step1: Enter into Menu
Setup
Record
Time tab. Refer to Fig 4-13:
Parameter
Meaning
Rate
Range from: 1-30
（
NTSC
）
1-25(PAL)
Resolution
Support CIF, HD1 and D1
Quality
The higher the value is, the clearer the recorded image is.
Six options: lowest, lower, low, medium, higher and
highest.
Encode
VBR and CBR
Max
bit
stream
Range from: 256 Kbps~2 Mbps
VOOK
