DVR User Manual
32
4.5.3 Video Loss
Step1: Enter into Menu
Setup
Alarm
Video Loss tab. Refer to Fig 4-26:
Step2: The setup steps of video loss trigger are familiar with alarm handling; user can refer to
Chapter 4.5.1 Sensor
alarm handling for more details.
Step3: Select “All” to setup all channels with the same parameters.
Step4: Click “Apply” button to save the setting; click “Exit” button to exit the current
interface.
Fig 4-26 Video Loss
4.5.4 Other Alarm
This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect
event, Disk Attenuation or Disk Lost.
Step1: Enter into Menu
Setup
Alarm
Other Alarm tab. Refer to Fig 4-27:
Step 2: Use the dropdown menu and select the event or the alarm.
Step 3: Check the required trigger options.
If the selected event is “Disk Full”, then use the drop down box for “Disk Shortage
Alarm” to choose a threshold value for remaining HDD space. If the threshold value is
reached, the system will trigger the Disk Full Alarm.
Click “Apply” to save settings; Click “Exit” to exit the current interface.
Fig4-27 Other Alarm
VOOK
