DVR User Manual
36
4.6.4 Server
This function is mainly used for connecting ECMS.
Step 1: In the server tab, select “enable” as shown in the Fig 4-32.
Step 2: Check the IP address and port of the transfer media server in the ECMS. The
default server port for auto report is 2009. If it is modified, please enter into the
transfer media interface to check.
Step 3: Enable the auto report in the ECMS when adding a new device. Then input
the remaining information of the device in the ECMS. After that, the system will
auto allot a Device ID. Please check it in the ECMS.
Step 4: Input the above-mentioned server IP, server port and device ID in the server
Fig 4-32 Network Configuration-Server
interface .Then click “Apply” button to save settings. Now, the ECMS system will automatically connect this device.
4.6.5 Other Settings
Step 1: Enable DDNS server: user needs to input user name, password and host domain name of the registered website, click TEST to test
the effectiveness of the relevant information.
Step 2: Click “Apply” button to save the setting; click “Exit” button to exit the current interface.
Fig 4-33 Network Configuration-Other Settings
Note: The domain name server that selected by user is
a banding domain name of DVR. User should logon the
website which provided by the server supplier to
register a user name and password firstly, and then
apply for a domain name on line. After the successful
application, user can access the server from the IE
client by inputting that domain name.
VOOK
