53
CONNEXION ELECTRIQUE
x
L’installation de cet appareil et son branchement au réseau électrique ne doit être confiés
qu’à un électricien parfaitement au fait des prescriptions normatives.
x
La protection contre les pièces sous tension doit être assurée après le montage.
x
Les données de raccordement nécessaires se trouvent sur la plaque signalétique et la plaque
de branchement placées sous l’appareil.
x
Cet appareil doit être séparé du secteur par un dispositif de sectionnement omnipôles.
Lorsque celui-ci est ouvert (déclenché), un écartement de 3mm doit être assuré.
x
Le circuit électrique doit être séparé du réseau par des dispositifs appropriés, par exemple les
disjoncteurs, les fusibles, les disjoncteurs différentiels et les contacteurs.
x
Si l’appareil n’est pas muni
d’une fiche accessible, des moyens de déconnection doivent être
incorporé à l’installation fixe conformément aux réglementations de l’installation.
x
Le câble d’alimentation doit être placé de sorte à ce qu’il ne touche pas de parties chaudes de
la table de cuisson.
Attention !
Cet appareil n’est conçu que pour une alimentation en 230 V~ 50/60 Hz.
Raccordez toujours le fil de terre de protection.
Respectez le schéma de raccordement.
Le boîtier de raccordement se situe sous la plaque de cuisson. Pour ouvrir le capot, servez-vous
d’un tournevis moyen. Placez le dans les 2 fentes situées à l’avant des 2 flèches.
Réseau
Raccordement Diamètre câble
Câble
Calibre de protection
400V~ 50Hz
2 N
4 x 2.5 mm
²
H 05 VV - F
H 05 RR - F
25 A *
400V~ 50Hz
3 N
5 x 1.5 mm
²
H 05 VV - F
H 05 RR - F
16 A *
* calculé avec le coefficient de simultanéité suivant standard EN 60 335-2-6
Summary of Contents for EKI8050/6FLEX
Page 55: ......