45
Détection de récipient
La détection de récipient assure une sécurité parfaite. L’induction ne fonctionne pas
:
x
Lorsqu’il n’y a pas de récipient sur la zone de cuisson ou lorsque ce récipient est inadapté
à l’induction. Dans ce cas il est impossible d’augmenter la puissance et dans l’afficheur le
symbole [ U ] apparaît. Le [ U
] disparaît lorsqu’une casserole est posée sur
le foyer de
cuisson.
x
Si en cours de cuisson le récipient est enlevé de la zone de cuisson, le fonctionnement est
interrompu. Dans l’afficheur le symbole [
U ] apparaît. Le [ U ] disparaît lorsque le récipient
est remis sur le foyer de cuisson. La cuisson reprend au niveau de puissance sélectionnée
au préalable.
Après utilisation, éteignez la zone de chauffe. Ne laissez pas la détection de casserole [ U ] active.
Indicateur de chaleur résiduelle
Après l’arrêt des zones de cuisson ou l’arrêt complet de la ta
ble, les zones de cuissons sont
encore chaudes et sont signalées par le symbole [ H ].
Le symbole [ H ] s’éteint lorsque les zones de cuisson peuvent être touchées sans danger.
Tant que les témoins de chaleur résiduelle sont allumés, ne touchez pas les zones de cuisson et
ne posez aucun objet sensible à la chaleur.
Risque de brûlure et d’incendie
!
Fonction booster
La fonction Booster [ P ] et Double Booster [
] octroie un renforcement de puissance à la
zone de cuisson sélectionnée.
Le Booster et le Double Booster sont conçus par exemple pour faire chauffer rapidement de
grandes quantités d’eau, comme pour la cuisson des pâtes.
x
Enclencher / arrêter le Booster:
Action
Bandeau de commande
Afficheur
Enclencher Booster
glisser jusqu’à la fin du «
SLIDER »
[ P ]
ou appuyer directement sur la fin du
« SLIDER »
Stopper Booster
glisser sur le « SLIDER »
[ 9 ] à [ 0 ]
x
Enclencher / arrêter le Double Booster:
Action
Bandeau de commande
Afficheur
Enclencher le 1
er
Booster
glisser jusqu’à la fin d
u « SLIDER »
[ P ]
ou appuyer directement sur la fin du
« SLIDER »
Enclencher le 2
nd
Booster
ré-appuyer sur la fin du « SLIDER »
[
clignote avec P ]
Stopper le 2
nd
Booster
glisser sur le « SLIDER »
[ P ] à [ 0 ]
Stopper le 1
er
Booster
glisser sur le « SLIDER »
[ 9 ] à [ 0 ]
Gestion de la puissance maximale :
L’ensemble de la table de cuisson est doté d’une puissance maximale. Lorsque la fonction
Booster est activée, et pour ne pas excéder cette puissance maximale, la commande
électronique
réduit automatiquement le niveau de cuisson d’une autre zone de chauffe.
Durant quelques secondes, l’afficheur de cette zone de cuisson en clignotant [ 9 ] puis affiche le
niveau de cuisson maximum possible :
Zone de cuisson sélectionnée
Autre zone de cuisson ( exemple : puissance niveau 9 )
[ P ] est affiché
[ 9 ] passe à [ 8 ] et clignote
Summary of Contents for EKI8050/6FLEX
Page 55: ......