5
COMPRESSED AIR SYSTEM
Quick
Connector
Quick
Connector
Quick
Coupler
Air
Compressor
Lubricator
Regulator
Filter
Quick
Coupler
Tool
This 2 in 1 Air S Nailer is designed to be
operated at 4.8-7.5bar using clean, dry, regulated,
compressed air.
DO NOT exceed the 5.7bar maximum operating
pressure.
Before using the Air Stapler, regulate the air
pressure on your air compressor to the minimum psi
for your tool.
An in-line filter/lubricator/regulator unit, depicted below,
should be installed and should be located as close to the
Air Stapler, as possible.
The unit will protect your tool from damaging water build-
up, allow you to adjust and maintain constant air pressure
to your tool, and save you the inconvenience of having to
manually lubricate your tool every time you use it.
STAPLE/NAIL SPECIFICATION
(50mm) 1.969”
(45mm) 1.772”
(40mm) 1.575”
(38mm) 1.496”
(35mm) 1.378”
(32mm) 1.260”
(30mm) 1.181”
(25mm) .984”
(20mm) .787”
(15mm) .591”
(10mm) .394”
.224”
(5.7mm)
.049
(1.25mm)
.630”
(16mm)
.748”
(19mm)
.984”
(25mm)
1.260”
(32mm)
.039”
(1mm)
1.575”
(40mm)
.866”
(22mm)
1.102”
(28mm)
1.496”
(38mm)
039”
(1mm)
Ga18
.049
(1.25mm)
.071-.079
(1.8-2.0mm)
60
0
60
0
