3
4TD
- SET TIME DELAY USING SW1 DIP SWITCHES
SWITCH
NUMBER
4TD DIP SWITCH DEFINITIONS
All switches shown in “OFF” position in wiring diagram
Enable Time Delay
Allows you to choose which
outputs will have the below time delay.
1
Turn “ON” to enable time delay for Locking Device 1
2
Turn “ON” to enable time delay for Locking Device 2
3
Turn “ON” to enable time delay for Locking Device 3
4
Turn “ON” to enable time delay for Locking Device 4
Set Time Delay
(0-75 seconds, 5 second increments)
0 Sec: Switches 5-8 “OFF”
75 Sec: Switches 5-8 “ON”
5
Adds 5 seconds to the time delay when “ON”
6
Adds 10 seconds to the time delay when “ON”
7
Adds 20 seconds to the time delay when “ON”
8
Adds 40 seconds to the time delay when “ON”
DIP switches on SW1 can be turned “ON” by
moving them in the direction that the arrow is
pointing. Switches below shown in “OFF” position
Summary of Operation
• Output turns “ON” when input is activated (closed).
• Time delay begins when input is released (opened).
• Locking Device output will remain “ON” during time delay.
• If
I1-I4
inputs are wired together, outputs will sequence.
SW1
1 2 3 4 5 6 7 8
O N
O F F
SW1
SW2
1 2 3 4 5 6 7 8
1 2
4TD INPUT / OUTPUT
TERMINAL BLOCK DEFINITIONS
Input 1
Access Control 1
Input 2
Access Control 2
Input 3
Access Control 3
Input 4
Access Control 4
Output 1*
Lock 1
Output 2*
Lock 2
Output 3*
Lock 3
Output 4*
Lock 4
*See page 2 for dry contacts
