VOCOM II
Operation Instructions
The information is developed by
©
Volvo Group in Sweden.
17
Fig. 5
–4:
Device installed
If for some reason the device driver fails to install, try again by disconnecting VOCOM II from
the USB port and connecting it to a different USB port, or by restarting the computer.
Automatic Firmware Update
After installing the VOCOM II to the computer, an automated firmware update will launch.
Note:
Make sure that Tech Tool (or similar programs) has been turned off.
When the firmware update starts, the VOCOM icon in the Configurator will turn yellow and
status will change to updating.
A small window (see below) will open and show the progress of the update.
Fig. 5
–5:
Automatic firmware updating
When the firmware is finished, the device will reboot itself. Wait a couple of seconds to make
sure that an FPGA update is not necessary.
The following windows will pop up in case of an FPGA update.
Fig. 5
–6:
Automatic firmware updating