VOCOM II
Operation Instructions
The information is developed by
©
Volvo Group in Sweden.
52
To change the log level of a particular module, perform the following steps:
1
Open the
Log Configuration
page by clicking
Log Configuration
in the Options
menu
.
2
Change the
Log level
of one or more log
Modules
.
3
Click
Save
.
Note:
Log level changes will immediately take effect after step 3, no reboot is necessary.
Fig. 7
–22: Log Configuration page
1
Log level menu button
2
Log levels menu
3
Save button
Changing the log level for components with scope "Windows logs and device traces" will affect
both the log level on device side and on PC side. This is the case for the VOCOM II diagnostic
APIs, i.e. RP1210C API and J2534/J2534-1 API.
Downloading device traces can be done through the VOCOM II Configurator. See section
7.4.7 Download log files.
VOCOM II Windows logs can be found under:
C:\ProgramData\ACTIA I+ME GmbH\VOCOM II\Log.
Note:
Log levels will be reset to their default values by an installer update.