Volvo V 40, Owner'S Manual

Page: 170 / 492

||
06 Locks and alarm
06
168
*
Option/accessory, for more information, see Introduction.
Remote control key and PCC* with 2
batteries
1. Carefully prize out the batteries.
2. First install one new one with the (
+
) side
up.
3. Position the white plastic tab in between
and finally install a second new battery
with the ( + ) side down.
Battery type
Use batteries with designation CR2430, 3 V.
Assembly
1. Press the remote control key together.
2. Hold the remote control key with the slot
pointed up and lower the key blade into
its slot.
3. Lightly press the key blade. You should
hear a "click" when the key blade is
locked in.
IMPORTANT
Make sure that exhausted batteries are
disposed of in a manner which is kind to
the environment.
Related information
•
Remote control key with key blade (p.
159)
•
Remote control key - function (p. 162)
Keyless*
Keyless lock and ignition system is available in
two function levels, Keyless drive and Keyless
start.
For cars with Keyless start function the car
can be started (p. 268) without the remote
control key in the ignition switch.
For cars with Keyless drive function, the car
can be locked and unlocked (p. 171) without
pressing a button on the remote control key,
and also be started without the key being
inserted in the ignition lock. The system
makes it easier and more convenient to open
the car, e.g. when your hands are full.
Both of the car's remote control keys have
Keyless function. It is possible to order more
remote control keys, see Remote control key
with key blade (p. 159).
The car's electrical system can be set to
three different levels - key position (p. 71)
0
,
I
and
II
- with the remote control key.
Related information
•
Keyless* - Secure handling of the remote
control key (p. 169)
•
Keyless* - interference to remote control
key function (p. 170)