Volvo V 40, Owner'S Manual

Page: 323 / 492

09 Wheels and tyres
09
}}
*
Option/accessory, for more information, see Introduction.
321
5.
Refit any full wheel covers.
NOTE
The wheel cover outlet for the valve must
be positioned over the valve on the wheel
rim during fitting.
Putting back the jack* and tools
The tools and jack must be returned to their
correct places in the foam block after use.
1. Unscrew the towing eye from the wheel
bolt wrench.
2. Put back any tools that have been used in
the relevant compartments in the foam
block in the following order:
•
towing eye/funnel/torx wrench/socket
for locking wheel bolts/tool for wheel
covers
•
jack (must be cranked to the correct
height so that it fits into the foam
block's compartment, the handle
above the foot and down in the groove
in the foam block)
•
socket wrench (above the jack).
3. If the spare wheel has been used, then
the punctured wheel can be placed in the
plastic bag contained in the package with
the gloves. Place the foam block back in
the storage compartment and tighten the
mounting screw to the floor of the storage
compartment.
If the spare wheel has
not been used,
place the foam block in the spare wheel
and place the spare wheel back in the
storage compartment. Tighten the attach-
ing screw to the floor of the storage com-
partment.
4. Return the detachable towbar.
NOTE
•
After a tyre has been inflated, always
refit the dust cap in order to avoid
damage to the valve from gravel, dirt,
etc.
•
Only use plastic dust caps. Metal dust
caps can rust and become difficult to
unscrew.
IMPORTANT
The tools and jack* must be stored in the
intended location in the car's cargo area
when not in use.