8
Install a new gasket and screw in the lower front
bolt a couple of turns.
9
Lift up the back edge of the sea; and suspend the
bracket from the front bolt (
1
). Fit a bolt (
2
) to the
rear end.
Install the remaining bolts and tighten them.
Install the bolt (
3
) to the coolant drain line.
10 Install the front and rear pipes to the oil cooler with
new seals. Install the hose to the turbocharger
with a new seal.
Install the pressure sensor connector. Clamp the
heat shield to the pressure sensor.
Install new oil filters.
Clamp the hose to the waste gate controller.
11 Replenish or change the oil.
12 Start the engine and check oil system function
and integrity.
13 Switch the engine off and check the oil level.
P0010004
P0010005
P0010006
22-2 Oil filter
236
7748841 06-2010
Summary of Contents for TAD1343GE
