Figure 2
Securing lifting frame
1
E 1370
5. Raise the lifting frame and position support, see
.
Figure 2
Lower the lifting frame onto the support and tilt the bucket fully forward.
6. Remove the front mudguards and front wheels.
7. Drain the oil from the axle.
8. Remove plate guard for the brake pipes.
9. Tie up the propeller shaft and remove the propeller shaft flange bolted joint by the front axle.
10. Remove the hub retainers, half shafts and thrust washers.
11. Remove electrical leads and hoses to differential lock and brake. Use protective plugs or fit an ejecto.
12. Remove the protecting plates over the front axle attaching bolts.
13.
Figure 3
Removing front axle
