Service Information
Document Title:
Function Group:
Information Type:
Date:
Fitting rear axle
460
Service Information
2014/5/29
Profile:
Fitting rear axle
Op nbr 46008
999 3742 Sleeve
1. Place the axle in position under the machine.
Connect a hoist, see Fig. [Invalid linktarget]. Axle weight including mounting brackets approx. 1550 kg (3418 lb).
2. Lift the axle with the lifting device and secure the axle with a jack in order to prevent it from turning while it is
being lifted. Fit the attaching bolts. Tighten the bolts to 804 N m (593 lbf ft)
3. Place the wheels in position.
Tighten the nuts to 600 N m (443 lbf ft).
4. Connect brake hose, cabling to temperature senso, lubricating oil pipes and the hose from the breather filter to the
axle.
5. Connect the propeller shaft to the rear axle, see
.
Figure 1
Tighten the bolts to 57 N m (42 lbf ft).
6. Lubricate the rear axle mounting bearings. Remove any supports.
7. Bleed rear brake circuit.
8.
Figure 1
Attaching propeller shaft
1
3742
