13
D7600184
Insert the new shock absorber (1) from the kit through the lower
trailing arm and the spring
Raise the shock absorber and align it in the upper bearing in the
spring strut turret
Align the lower mounting (2) of the shock absorber in the trailing
arm
Install the new screw (3). Tighten to 80 Nm (60 ft.lb.).
14
A6500361
Tensioner (P/N 999 5659) is used when working on the
suspension. It is vital that the screwed joints for the rubber
bushings are tightened in the normal position; in the same
position as when the car is on the ground. The tensioner relieves
the load on suspension components during removal and
installation. The tool is secured to the rear axle using a mounting
(P/N 999 5740B). This means that the stability of the lift is not
affected during the work.
Install:
the threaded rod (P/N 999 5659) on the mounting (P/N 999
5740B)
the mounting (P/N 999 5740B) on the sub-frame
the rails (P/N 999 5740B-1) on the control arm
the tensioner (1)
Ensure that the rollers are against the rails on both sides of the
control arm.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Lowered sports chassis- 8670993 - V1.0
Page 11 / 18