17
IMG-372648
Drill a
Ø5.5 mm (Ø5/32")
hole for the front intake grounding on
the underside of the left front side member as illustrated.
Deburr the hole edges, remove the drill swarf and apply
rustproofing agent to the edges.
Remove screw and toothed washer from the kit and tighten the
ground cable.
Clamp up the excess ground cable to the cable for the front
engine block heater socket using a tie strap from the kit.
18
IMG-231572
Take two clips from the kit and install them on the upper edge of
the subframe, and turned in toward the subframe U-profile.
Install the clips in the positions illustrated.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine block heater 110V- 31399531 - V1.0
Page 12 / 22
