Volvo 2009 V70 R-DESIGN Owner'S Manual Download Page 46

Page: 46 / 286

01 Safety

Integrated booster cushion

•

That the seat belt is properly positioned
and is taut.

•

The shoulder section of the seat belt is
across the child's collarbone, not over the
neck.

•

The lap section of the seat belt is across
the child's hips and not the abdomen.

Using an integrated booster cushion

Stage 1

G017696

G017697

Pull the handle (1) forward and upward (2)
to release the booster cushion.

Press the booster cushion rearward to lock
it in position.

Stage 2

G017783

G017784

With the booster cushion in the stage 1
position, press the button (see the arrow in
illustration 1).

Lift the front edge of the booster cushion
and press it rearward toward the backrest
to lock it in position.

Summary of Contents for 2009 V70 R-DESIGN































































































































































































































































































Search results

Summary of Contents for 2009 V70 R-DESIGN

Reviews:

Related manuals for 2009 V70 R-DESIGN

Brands by name

Popular brands

Volvo 2009 V70 R-DESIGN, Owner'S Manual

Search results

Summary of Contents for 2009 V70 R-DESIGN

Reviews:

Related manuals for 2009 V70 R-DESIGN

Brands by name

Popular brands