03 Your driving environment
Transmission
03
108
Geartronic–manual shifting
Geartronic allows you to manually shift among
your vehicle's six forward speeds. Geartronic
can be selected at any time.
•
To access the manual (
M
) shifting position
from Drive (
D
), move the gear selector to
the right to
M
(or to
S
on models equipped
with Sport mode).
NOTE
On models equipped with Sport mode, the
transmission will not switch to manual shift-
ing mode until the gear selector is moved
forward or rearward. The selected gear will
then be shown in the information display
(see page 71).
•
To return to the
D
position from
M
or
S
,
move the gear selector to the left.
While driving
•
If you select the
M
position while driving,
the gear that was being used in the Drive
position will also initially be selected in the
M
position.
•
Move the gear selector forward (toward
"+") to shift to a higher gear or rearward
(toward "–") to shift to a lower gear.
•
If you hold the gear selector toward "–", the
transmission will downshift one gear at a
time and will utilize the braking power of
the engine. If the current speed is too high
for using a lower gear, the downshift will
not occur until the speed has decreased
enough to allow the lower gear to be used.
•
If you slow to a very low speed, the trans-
mission will automatically shift down.
Shiftlock – Neutral (N)
If the gear selector is in the
N
position and the
vehicle has been stationary for at least 3 sec-
onds (irrespective of whether the engine is run-
ning) then the gear selector is locked.
To be able to move the gear selector from
N
to
another gear position, the brake pedal must be
depressed and the ignition must be in posi-
tion
II
, see page 77.
Geartronic–starting on slippery surfaces
Selecting 3rd gear in Geartronic’s manual shift-
ing mode can help provide better traction when
starting off on slippery surfaces. To do so:
1.
Depress the brake pedal and move the
gear selector to the right from the
D
posi-
tion to
M
. The text in the instrument panel
display will change from
D
to
1
.
2.
Press the gear selector forward and
release it (this selects 2nd gear). Press the
selector forward again and release it to
select 3rd gear.
3.
Release the brake pedal and press gently
on the accelerator pedal.
Shiftlock override
G021352
If the vehicle cannot be driven, for example
because of a dead battery, the gear selector
must be moved from the
P
position so that the
vehicle can be moved
3
.
Lift away the rubber mat on the floor of the
storage compartment behind the center
console and open the hatch.
Insert the key blade into the opening as far
as possible. Press the key blade down and
keep it held down. Move the gear selector
from the
P
position. For information on the
key blade, see page 52.
3
If the battery is dead, the optional electric parking brake cannot be applied or released. Connect an auxiliary battery if the battery voltage is too low, see page 105.
Summary of Contents for 2009 V70 R-DESIGN
