Volvo 2009 V70 R-DESIGN, Owner'S Manual

Page: 141 / 286

04 Comfort and driving pleasure
Audio system
04
``
141
Skip options
This function is used to remove a channel from
the list of available channels.
Skipping a channel
1. Select CHANNEL SKIP LIST and press
ENTER .
2. Select a category in the list and press
ENTER .
3. Skip channels in the list presented by
pressing
ENTER or right arrow key.
Unskip all channels
This permanently removes all channels from
the skip list and makes them available for
selection.
Temp. unskip all ch.
This function will temporarily unskip all chan-
nels and make them available for selection. The
channels remain on the skip list and will again
be skipped the next time the ignition is
switched on.
Channel lock
Access to specific channels can be restricted
(locked). A locked channel will not provide
audio, song titles, or artist information.
NOTE
All channels are initially unlocked.
Locking a channel:
1.
Select
Sirius ID
in the menu and select
LOCK OPTIONS and press ENTER .
2.
Select
CHANNEL LOCK LIST
and press
ENTER
3.
Enter the channel access code
6
and press
ENTER .
4. Select a category in the list and press
ENTER .
5. Lock channels in the list presented by
pressing
ENTER or right arrow.
The channel is now locked and a checked box
will be displayed to indicate this. It will be nec-
essary to enter the channel access code
6
in
order to listen to a locked channel.
Unlocking a channel
A channel's access code
6
is required to unlock
a channel.
Unlock all channels
This permanently removes all channels from
the locked list and makes them available for
selection.
Temp. unlock all ch.
This function will temporarily unlock all chan-
nels and make them available for selection. The
channels remain on the locked list and will
again be locked the next time the ignition is
switched on.
CHANGE CODE
This function makes it possible to change the
channel access code. The default code is
0000.
To change the code:
1. Select CHANGE CODE and press
ENTER .
2.
Enter the current code and press ENTER .
3. Enter the new code and press ENTER .
4.
Confirm the new code and press ENTER .
If an incorrect code is entered, the text
WRONG CODE! is displayed.
If you have forgotten the access code:
1. Select SIRIUS ID in the Sirius settings
menu and press ENTER .
2. Press and hold the ENTER button for
2 seconds.
3. The current code will be displayed.
6 The default code is 0000. If you have changed the code and forgotten it, see the section "If you have forgotten the access code."