Volvo 2008 C70, Owner'S Manual

Page: 47 / 257

02 Instruments and controls
46
Lighting panel
02
Headlamp levelling
The load in the car changes the vertical align-
ment of the headlamp beam, which could
dazzle oncoming motorists. Avoid this by
adjusting the height of the beam.
– Turn the ignition key to position II .
– Turn the headlamp control (2) to one of the
end positions.
– Roll the control (1) up or down respec-
tively to raise or lower beam alignment.
Cars with Bi-Xenon headlamps
1
have auto-
matic headlamp levelling, so there is no
control (1).
Position/parking lamps
Position/parking lamps can be switched on
irrespective of ignition key position.
– Turn the headlamp control (2) to the centre
position.
When the ignition key is in position II the
position/parking lamps and number plate
lighting are always on.
Headlamps
Automatic dipped beam (certain
countries)
Dipped beam comes on automatically when
the ignition key is turned to position
II ,
except when the headlamp control (2) is in
the centre position. If necessary, the auto-
matic dipped beam can be deactivated by an
authorised Volvo workshop.
Automatic dipped beam, main beam
– Turn the ignition key to position II .
– Dipped beam is activated by means of
turning the headlamp control (2) clockwise
to the end position.
– Main beam is activated by means of mov-
ing the left-hand stalk switch towards the
steering wheel to the end position and
releasing it, see page 48.
The lamps are switched off automatically
when the ignition key is turned to position
I
or 0 .
Instrument lighting
The instrument lighting is switched on when
the ignition key is in position
II and the head-
lamp control (2) is in one of the end positions.
The lighting is automatically dimmed during
the day and can be controlled manually at
night.
– Roll the control up or down (3) for brighter
or dimmer lighting.
Enhanced display lighting
To facilitate reading the odometer, trip meter,
clock and outside temperature gauge, these
illuminate when the car is unlocked and when
the key is removed from the ignition switch.
Position Specification
Automatic/deactivated dipped
beam. Only main beam flash.
Position/parking lamps
Automatic dipped beam. Main
beam and main beam flash
work in this position.
3 2 1
4 5 6
G020139
1
Option