Volvo 2008 C70, Owner'S Manual

Page: 215 / 257

10 Infotainment system
214
Radio functions
10
Display of programme type
The programme type of the current station
can be shown on the display.
Activating/deactivating display
– Press MENU and then ENTER .
– Scroll to PTY and press ENTER .
– Scroll to Show PTY and press ENTER .
Radio text
Some RDS stations transmit information on
programme content, artists, etc. This infor-
mation can be shown on the display.
Activating/deactivating radio text
– Press MENU and then ENTER .
– Scroll to Radio text and press ENTER .
Automatic frequency update – AF
The AF function selects one of the strongest
transmitters for a set station. The radio may
sometimes need to search through the entire
FM wavelength to find a strong transmitter. If
this occurs, the radio mutes and
PI seek
Exit to cancel appears on the display.
Activating/deactivating AF
– Press MENU and then ENTER .
– Scroll to Advanced radio settings and
press ENTER .
– Scroll to AF and press ENTER .
Regional radio programmes – REG
This function causes the radio to
continue with a regional transmitter
even if its signal strength is low.
REG indicates that the function is
active. The regional function is normally
deactivated.
Activating/deactivating REG
– Press MENU and then ENTER .
– Scroll to Advanced radio settings and
press ENTER .
– Scroll to
Regional
and press ENTER .
Enhanced Other Networks – EON
The EON function is particularly useful in
urban areas with many regional radio sta-
tions. It allows the distance between the car
and the radio station transmitter determine
when programme functions should interrupt
the current audio source.
• Local – interrupts only if the radio station
transmitter is close.
• Distant
1
– interrupts if the station trans-
mitter is far away, even if there is a lot of
static.
• Off – no interruption for programmes from
other transmitters.
Activating/deactivating EON
– Press MENU and then ENTER .
– Scroll to Advanced radio settings and
press ENTER .
– Scroll to
EON
and press ENTER .
– Scroll to Local , Distant or Off and press
ENTER .
Resetting RDS functions
Resets all radio settings to the original fac-
tory settings.
– Press MENU and then ENTER .
– Scroll to Advanced radio settings and
press ENTER .
– Scroll to Reset all and press ENTER .
Volume control, programme types
The interrupting programme form is heard at
the volume selected for such. If the volume
level is adjusted during the programme inter-
ruption, the new level is saved until the next
programme interruption.
NOTE
Not all radio stations support this function.
1
Default/Factory setting