Volvo Penta TAMD162C, Instruction Book

Page: 60 / 84

58
Electronics Terminal box
TAMD162C, TAMD163A and TAMD163P
(non-classifiable engine specification)
1. Semi-automatic fuses (8A)
2. TAMD162C: Ceramic fuse (8A)
for stop solenoid
3. TAMD162C with stop solenoid: Stop relay
TAMD163A, -P: Starter relay
4. Ground plate
Fuses
TAMD162C, TAMD163A and TAMD163P
(non-classifiable engine specification)
Two semi-automatic 8A fuses are located in the termi-
nal box. The fuses break the circuit on overload and can
be reset by pushing in the buttons on the side of the ter-
minal box.
The TAMD162C (with a stop solenoid) is also fitted with
a ceramic 8A fuse for the stop solenoid.
Technical description
Electrical system
These engines have an electrical system with a generous generator capacity for a normal-sized boat. When an extra
power supply is required, we recommend that you fit an extra generator or install a separate generator unit.
These engines have a two-pole electrical system with an alternating current generator. Supply voltage is 24V.
The electrical system also includes senders for monitoring the engine’s coolant temperature and oil pressure. Keel
cooled engine versions are also fitted with a switch for monitoring the charge air temperature.
For engines that can be subject to certification there is a more comprehensive monitoring system. These type of en-
gines are not dealt with in this section. For more information refer to the manual “Electrical systems, Function and in-
stallation”.
Location of electrical components
in engine and reverse gear:
(Does not apply to engines with classifiable electrical
systems)
TAMD162C, TAMD163A and TAMD163P
(non-classifiable engine specification)
1. Engine coolant temperature (ECT) sender
2. Engine coolant temperature (ECT) switch
3. Oil pressure switch, engine
4. Oil pressure sender, engine
5. Turbo pressure sender (accessory)
6. Reverse gear oil pressure sender (accessory)
7. Terminal box with two semi-automatic fuses
8. Generator (GEN)
9. Starter motor
10. TAMD162C*, TAMD163A, TAMD163P: Fuel shut-off
valve
11. Starter relay
12. TAMD162C**: Stop solenoid
13. Keel cooled engine version: Switch, high charge
air temperature (alarm)
* TAMD162C: Applies as of engine No. 1101052587/xxxx.
** Applies up to and incl. engine No. 1101052586/xxxx.
13