Volvo Penta IPS 350, Operator'S Manual

Page: 33 / 124

DEPTH ALARM, ON/OFF
Depth alarm can be switched ON/OFF.
SET DEPTH
Adjust the depth alarm value by turning the NAVIGA-
TION WHEEL. The value can be adjusted at a resolu-
tion of 0.1 m or 1 ft.
Once adjustment value is reached, the data is stored
by pushing NAVIGATION WHEEL.
DEPTH OFFSET
The depth sounder can be placed somewhere on the
hull that gives another depth than the desired depth.
You can then add or subtract a distance so that the
display shows the depth from, for example, the lowest
point on the boat, or from the surface.
Adjust the depth offset value by turning the NAVIGA-
TION WHEEL. The value can be adjusted at a resolu-
tion of 0.1 m or 1 ft.
Once adjustment value is reached, the data is stored
by pushing NAVIGATION WHEEL.
Depth alarm pop-up
The depth alarm pop-up will appear when the depth is
less than the depth alarm setpoint. The pop-up shows
the actual depth.
Acknowledge depth alarm by pushing NAVIGATION
WHEEL.
The depth alarm pop-up will re-appear every 30 sec-
onds until the depth increases and exceeds the depth
alarm setpoint.
Depth alarm (extra optional)
All depth alarm functions are accessed through this menu. A multisensor needs to be installed.
Depth alarm signal loss
If the depth alarm is enabled and the depth signal is
lost, for instance in the case of sensor malfunction, the
depth alarm signal loss pop-up will appear.
Depth sounder
Waterline
Lowest point
31
Instruments