19
Instruments
EVC control panel
There are two versions of the EVC control panel, one for single engine installations and another for twin installations.
Activation button
Used to activate the control panel, so that the engine
can be started and stopped.
Indication
(red):
No light:
The control position is not activated.
Light on:
Control position activated.
Flashing:
The control position cannot be activated
because the control lever is not in the neutral position or
the system has been locked from another control panel.
Indication (padlock):
Light on:
The system is locked and the engine can
only be controlled from an activated control panel.
Neutral button
Used to activate de-activate the reverse gear / stern
drive, so that the engine can be revved up.
Indicator (green):
No light:
Reverse gear/stern drive is engaged.
Light on:
The Control lever is in neutral position.
Flashing:
Reverse gear/stern drive is in neutral.
Synchronization indication
The synchronization function automatically adjusts the
engines to the same speed (rpm).
Indication (blue):
No light:
The synchronization function is not activated.
Light on:
The synchronization function is activated
Diagnostic button
Used if the diagnostic function has registered malfunc-
tion.
Indication (yellow):
No light:
Normal operation.
Light on:
Fault codes can be read.
Flashing:
Diagnostic function has registered a malfunc-
tion.
Dimmer function
Used to light up and extinguish background lighting in
the instruments and panels.
Press the button for 5 seconds to light or extinguish
background lighting. Background lighting can be adjusted
in five stages, by pressing the dimmer button.
Summary of Contents for D9-425
Page 1: ...OPERATOR SMANUAL D9 425 D9 500 D9 575 ...
Page 82: ...80 Notes ...
Page 87: ......
Page 88: ...77 4 4682 English 10 2005 ...