Volvo Penta D9-425, Operator'S Manual

Page: 30 / 88

28
Operation
Changing control position during operation
(optional extra)
This function must be enabled to permit the control panel to
be changed during operation. The function can only be ena-
bled by authorized Volvo Penta personnel. Please contact
your Volvo Penta dealer.
1. Press the activation button (1) to unlock the system.
The padlock sign goes out on all control panels to indi-
cate that it is possible to change control panel.
2. Press the activation button (1) on the alternative control
panel. The activation button indication flashes on the al-
ternative control panel, and on the main control panel it
gives constant light.
3. The alternative control panel becomes active when the
correct gear and approved engine speed is demanded.
The activation button (1) gives constant light to confirm
that the control panel is activated. The system is now
locked, which is indicated by the padlock sign, which
lights up.
NOTE! If the correct gear or engine speed is not de-
manded within 15 sec, the system ramps engine speed
down to neutral and the gearbox engages neutral.
Changing the control position
The first time you change control panel after starting the EVC
system, a bulb check is done automatically. All LEDs and
bulbs light up for 2 seconds.
1. Check that the control lever(s) is (are) in neutral on both
the control panel you leave and on the new control panel.
2. Check that the EVC system is not locked.
3. Press the activation button (1) for at least one second.
When the button is released, the indication lights up to con-
firm that the control position is activated.
4. Press the activation button (1) for a further second to lock
the EVC system. The padlock sign lights up in confirma-
tion. Unlock the system by pressing the activation button
for one second. This can only be done from an activated
control panel.
1