70
Repair instructions
24. Install the shift mechanism in the gear housing in
a way that the screw (1) is displaced towards star-
board.
NOTE! Make sure that the sliding shoe (2) is turned
to a position as indicated in the picture. The shift
mechanism will not function if the sliding shoe is
turned in the opposite direction.
25. Set the shift mechanism in a position between
forward and neutral or between reverse and neutral.
(The pin (1) shall rest on one of the ‘cams’). Install the
shift mechanism in the sterndrive.
1
2
3
1
2
3
22. Install the eccentric piston (1) in the housing. Do
not damage the seal! Push in the locating pin (2).
Align the hole with the housing. Lock it in place with a
new spring pin (3).
23. Install a new O-ring (3) and insert the spring (2)
and the sliding shoe (1). Coat the contact surface with
Volvo Penta part no. 1141570-0 sealant.
