88
Repair instructions
9.
Knock out the 2 sealing rings (
1
) off the propeller
bearing housing.
10.
Fold down the tab on the locking washer (
1
) and
remove the nut holding the pinion to the vertical drive
shaft.
The vertical shaft
11a. Models 280 and 290 of earlier manufacture
and model SP:
Fold down the tab of the locking
washer (
1
) and remove the round nut (
2
). Remove the
locking washer and the spacer ring (
3
).
11b. Models 280, 290 of later manufacture:
Lift the
gear housing off the special tool and place it back in
the work stand. Remove the nylock® nut with a hook
spanner wrench.
12.
Use special tools
884267
and
884830
to remove
the pinion.
1
1
1
2
3
884267
884830
