26
Removing the sterndrive
7. Remove the cotter pin and washer from the shift
cable end. Remove the end pivot pin from the cable.
8. Loosen screw holding the shift cable clamp and re-
lease shift cable.
9. Remove the two screws (1) holding the steering pin
to the upper gear head (2). Using two M6 screws (3)
30 mm or longer, install into the threaded holes of the
steering pin. As the screws are turned in, the steering
pin will be forced out of the steering pin socket and
steering helmet bushing.
10. Using special tool 884573, remove the clamp
around the u-joint bellows.
1
3
2
884573
