6.
PV Module (DC) Connection
CAUTION:
Before connecting to PV modules, please install a
separate
circuit breaker
between inverter and PV modules.
NOTE:
Please use 500VDC/12A circuit breaker.
Please follow below steps to implement PV module connection:
Step 1: Assemble provided PV connectors into PV modules by following below steps.
Negative terminal connection
CAUTION:
To prevent risk of electric shock, ensure the ground wire is properly earthed
before operating the solar inverter.
WARNING:
This inverter is only compatible to two types of PV modules: single crystalline
and poly crystalline. To avoid any malfunction, do not connect any sources of energy other
than these two types of PV modules to the EnerSolar inverter.
NOTE:
To optimize the inverter performance, the two PV arrays should be the same.
Summary of Contents for EnerSolar 3K PV
Page 1: ...EnerSolar 3K PV Inverter User Manual...
Page 20: ......
