Voltronic Power EnerSolar 3K PV, User Manual

Page: 13 / 21


Each indicates 150VDC. When input voltage is
below 100VDC, icon will flash.

When both of PV modules are not connected,
icon will flash.
Indicates the Inverter circuit is working.
Indicates grid.
Indicates energy generated in graphic bar.
8-3. Button Definition
Button Function
Up Button

Press this button to select last selection or increase value.
Down Button

If it’s in query menu, press this button to select next selection
or decrease value.

Press this button to mute alarm in standby mode.
ENTER Button

Press to enter query menu.

If it’s in query menu, press this button to confirm selection or
entry.
ESC Button

Press to return to last menu.
NOTE: If backlight shuts off, you may activate it by pressing any button. When an error
occurs, the buzzer will continuously sound. You may press any button to mute it.
8-4 Query Menu Operation
This display shows current values of your system. This displayed values can be changed in
query menu via button operation. Press “Enter” button to enter query menu. There are three
query selections:

Input voltage of PV modules

Frequency or voltage of AC output

Graphic bar display of power generation in yearly, monthly, or daily basis.
Setting Display Procedure

Input voltage of PV module
Procedure LCD Display
Default setting is P1.