P. Optional Remote Display HBR-3100
Warning:
AC mains supply must be disconnected completely from the battery charger before plugging
in of the Remote Display HBR-3100. Otherwise the charger will be damaged.
I. Introduction
The Remote Display comes with 10m extension cable with interconnector.
When the optional remote HBR-3100 is installed, it will display the real time charging stage, voltage & amperage, battery type set,
max. power level set, type of fault with alarm, etc and can remote control the output terminal On/OFF, trigger the Equalization
charging for wet battery and force charger to float mode.
It can be mounted on BC charger by replacing the dummy cover on the front panel or remotely mounted with 10m extension cable
going through the unplugged hole at the front of the dummy panel.
II. Connection
1. 10 Meters Phone Cable
2. In Line Coupler 6P6C
3. HBR-3100 Remote Display Module
a.
Take out the dummy remote panel from charger and remove the black hole plug from the dummy remote panel
.
b.
Remote cable through the dummy remote panel’s hole.
Hole plug