background image

VOLTDRIVE s.r.o.,

Háj 365 (MICOS TELCOM premises), 798 12 Kralice na Hané, Czech Republic

Tel.: +420 582 307 603, Fax: +420  582 307 688

e-mail: [email protected], www.voltdrive.com

9

SAFETY INSTRUCTIONS

The product is capable of safe operation. The manufacturer warns of the risk of possible danger resulting from incor-
rect handling or incorrect use of the product:

¬

  The installation and maintenance must be carried out by a competent person with relevant electrical qualifications, 

who informs the operator about the conditions for safe operation.

¬

  The product must not be used for other than its intended purpose.

¬

  The product must not be modified compared to its standard design.

¬

  The product must not be operated with other voltage, current or frequency than it was produce or professionally mod-

ified for.

¬

  The product must be placed and secured, so that it is difficult to access or inaccessible for the people without any 

electrical qualification, especially children.

¬

  Before every re-commissioning, for example, after any reparation or maintenance, the protection and all safety meas-

ures must be completely restored to ensure safe operation.

¬

  The product must not be used in conditions and environments that do not guarantee safe operation (for example, 

installed on a flammable surface, its cover made of flammable materials, insufficient protection against foreign body 
intrusion or water and other liquid ingress).

In case the user does not comply with any of the above instructions and if this noncompliance results in any defect, the 
manufacturer disclaims any liability for the defect.

Summary of Contents for ShiftGuard










Reviews: