This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2019 by Conrad Electronic SE.
1890139_v2_0119_02_m_dh_en
Package contents
• Digital oscilloscope
• 2 / 4 sensor heads
• Aligning tool
• USB cable
• Power cable
• Software CD with operating instructions in English
• Quick guide
• BNC –BNC cable (only for oscilloscopes with frequency generator function)
• Multimeter measurement cables (only for oscilloscopes with multimeter function)
• Measurement adapter for condensers (only for oscilloscopes with multimeter function)
Check all the parts for completeness and damage after unpacking.
Damaged parts must not be used for safety reasons. In case of any damage contact
our customer service.
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/down-
loads or scan the QR code. Follow the instructions on the website.
Installation of the measurement program
Switch on your computer and insert the enclosed software CD into the CD drive of your com-
puter. The automatic start mode will automatically start the installation of the measurement pro-
gram. If the program does not start automatically, open the file „setup.exe“ in the CD directory
Making measurements
The measuring signal should only be applied to the internal conductor. The
external conductor (reference earth) is connected to the earth potential (pro-
tective earth conductor).
Check the measuring device and its measuring leads for any damage before each
metering. Never take any measurements if the protecting insulation is defective
(torn, missing, etc.).
• To avoid electric shock, do not touch the connections/measuring points directly or
indirectly during measurements.
• Never reach beyond the grip surface of the probes during a measurement pro-
cess. There is danger of a life-threatening electric shock.
• Do not use the device shortly before or after a thunderstorm (lightning! / high-
power surges!). Make sure that your hands, shoes, clothing, the floor, the measur
-
ing device and/or measuring lines, circuits and circuit components are always dry.
• Measurements in circuits >30 V/AC and >30 V/DC may be carried out only by
specialists and trained persons who are familiar with the pertinent regulations and
the resulting dangers.
Follow the necessary safety instructions, regulations and protective measures for
the intrinsic safety
Cleaning
Before cleaning the device, switch it off and disconnect it from power, the USB cable, the
network cable and the device under test.
Live components may be exposed if the covers are opened or parts are re-
moved, unless this can be done manually without tools.
Prior to cleaning or repairing the device, all lines must be detached and the
device must be turned off.
• Do not use scouring, chemical or aggressive cleaning agents such as benzene, alcohol or
similar chemicals. These might attack the surface of the device. Furthermore, the fumes are
explosive and hazardous to your health. Moreover, you should not use sharp-edged tools,
screwdrivers or metal brushes, or the like for cleaning
• For cleaning the device or the display and the measuring cables, use a clean, slightly damp,
fuzz-free, antistatic cloth.
Disposal
Electronic devices are recyclable and do not belong in the household waste.
Dispose of an unserviceable product in accordance with the relevant statutory regu-
lations.
Technical data
Interface .............................................USB2.0 / LAN
Power supply ....................................100 – 240 V AC / 50 – 60 Hz
Power consumption ........................... depending on model 15 W / 24 W / max. 33 W (with
optional battery)
Working conditions ............................
0 °C to +40 °C, ≤ 90%, noncondensing
Storage conditions .............................
-20 °C to +60 °C, ≤ 60%, noncondensing
Weight ...............................................approx. 2600 g (without accessories)
Dimensions (L x W x H) .....................approx. 340 x 177 x 90 mm
a) General information
Measurement inputs ..........................Two/ four separated channels CH1 / CH2 / CH3 / CH4
Bandwidth ..........................................80 MHz / 100 MHz / 200 MHz
Rise time ............................................
≤ 4.375 ns / ≤ 3.5 ns / ≤ 1.75 ns
Input impedance ................................
1 MOhm ± 2% // 15 pF ±5 pF
Max. input voltage .............................CH1 - CH2 / CH4: 300V RMS (sensor head setting 10×)
Input coupling ....................................DC-AC-GND
Vertical resolution ..............................8 bit / 14 bit
Vertical deflection
..............................1 mV - 10 V/div
Time base ..........................................1 ns / 2 ns – 1000 s/div
Sampling rate ....................................max. 1 GS/s
Trigger mode .....................................auto, normal, single
b) Arbitrary function generator
(only for 1673262 / 1673264 / 1673266 / 1673268 / 1673269)
Output frequency ...............................25 MHz / 50 MHz
Signal types .......................................sine, square, ramp, pulse
Sampling rate ....................................125 MS/s / 250 MS/s
Vertical signal resolution ....................14 bits
Output voltage range .........................
2 mVss to 6 Vss (50 Ω);
c) Multimeter
(only for 1673268)
Resolution. .........................................3 3/4 digit / 4000 count
Diode test ..........................................0 V - 1.5 V
Input impedance ................................
10 MΩ
Acoustic continuity test ......................
<50 Ω ± 30 Ω
Capacity .............................................
51.2 nF - 100 μF ±(3% ± 3 digit)
Direct voltage .....................................
400 mV / 4 V / 40 V / 400 V / 1000 V ±(1% ± 1 digit)
Alternating voltage .............................
400 mV / 4 V / 40 V / 400 V ±(1% ± 3 digit),
...........................................................
750 V ±(1.5% ± 3 digit) at 40 Hz to 400 Hz
Direct current .....................................
40 mA / 400 mA ±(1.5% ± 1 digit)
...........................................................
4 A / 10 A ±(3% ± 3 digit)
Alternating current .............................
40 mA ±(1.5% ± 3 digit)
...........................................................
400 mA ±(2% ± 1 digit)
...........................................................
4 A / 10 A ±(3% ± 3 digit)
Impedance .........................................
400 Ω ±(1% ± 3 digit)
...........................................................
4 KΩ - 4 MΩ ±(1% ± 1 digit)
...........................................................
40 MΩ ±(1.5% ± 3 digit)
