91
With the buttons “INC” or “DEC”, you can select between “ON” and “OFF”.
Briefly press the button “ENTER/START” in order to save. “ON” (or “OFF”) then starts to
blink in the bottom display line.
With the buttons “INC” or “DEC”, you can select between “ON” and “OFF”.
Save the setting by pressing the “ENTER/START” button.
• With the “INC” button, you access the next setting (or with the button “DEC” the previous
setting or return to the main menu with the button “TYPE/STOP”.)
This function monitors the voltage at the charger input (e.g. for a 12V battery). If the
voltage drops below the configured value, the charging process is stopped.
Briefly press the button “ENTER/START”. The voltage value then begins to flash.
With the buttons “INC” or “DEC”, you can set the voltage value (10 to 11V).
Save the setting with the button “ENTER/START”; the voltage stops blinking.
• With the “INC” button, you access the next setting (or with the button “DEC” the previous
setting or return to the main menu with the button “TYPE/STOP”.)
Here you can set the brightness of the display.
Briefly press the button “ENTER/START”. The brightness value then begins to flash.
With the buttons “INC” or “DEC”, you can set the brightness.
Save the setting with the button “ENTER/START”; the brightness value stops flashing.
• With the “INC” button, you access the next setting (or with the button “DEC” the previous
setting or return to the main menu with the button “TYPE/STOP”.)
Input Power Low
Input Power Low
Input Power Low
Input Power Low
Input Power Low
Cut-Off 10.0V
Cut-Off 10.0V
Cut-Off 10.0V
Cut-Off 10.0V
Cut-Off 10.0V
Back-light
Back-light
Back-light
Back-light
Back-light
100%
100%
100%
100%
100%
Summary of Contents for B6 Duo
