18
Table of Contents
Introduction ..............................................................................................................17
Table of contents ......................................................................................................18
Intended use ............................................................................................................18
Commissioning ........................................................................................................19
General ..................................................................................................................21
Connection of mains cable ....................................................................................22
Adjustment of desired output voltage ..................................................................22
Adjustment of fixed voltage of 13.8V (only SPS 1525/1540 PFC) ........................22
Connection of a consumer ....................................................................................23
"SENSE” function (only SPS 1560 PFC)................................................................23
REMOTE control (only SPS 1560 PFC) ................................................................24
Servicing and cleaning ..............................................................................................26
Elimination of disturbances. ......................................................................................27
Technical data. ..........................................................................................................29
Intended Use
• Connection and operation of extra-low voltage consumers with an operating volta-
ge of 3V – 15VDC for model SPS 1525/1540 PFC or 1V – 15V for model SPS 1560
PFC to the connecting jacks
• The power consumption of a connected consumer may not exceed 25 A for the
SPS1540 model, 40A for the model SPS1540 and 60 A for the 1560 model.
• The switched-mode mains power supply is designed in compliance with protection
class 1. It is only approved for connection to shockproof sockets with protective gro-
unding and an alternating current of 230V~ /50 Hz commonly used in households.
• Operation is impermissible under unfavourable ambient conditions. The following
are unfavourable ambient conditions:
- Moisture or excessive humidity
- Dust and combustible gases, vapours or solvents
- Thunder and lightning or similar conditions such as strong electrostatic fields etc.
Use other than that described above will damage the product and may involve other
risks, such as short circuit, fire and electric shock etc. Do not change or modify any
part of the product. The safety instructions must always be heeded!
