background image

For carpets, the brush strip should be in a retracted 
position.Use the shift button on top of the nozzle. 
Press the shift button to eject the brush strip for soft 
efficient cleaning of hard floor. 

 

Turbo Nozzle

The turbonozzle should from time to time be used 
for most efficient carpet cleaning. Press Shift button 
to eject the brush strip for cleaning of hard floor.
 
 

Hard Floor Nozzle

The special hard floor nozzle should be used for 
efficient cleaning of hard floors such as slate, marble 
and sand stone.

Cleaning tools use

The crevice nozzle, dusting brush and upholstery are 
located in the box with the vacuum cleaner.

Small nozzles:

The crevice nozzle is used for radiators, crevices, 
corners, baseboards and between cushions.
Dusting brush is used for furniture, venation, blinds, 
books, lamp shades and shelves.
The upholstery nozzle is used to clean the sofa.

 
 

INSTRUCTIONS FOR USE

Before using appliance, unwind a sufficient length 

of cable and insert the plug into the power socket. 

A yellow mark on the power cable shows the ideal 

cable length. Don’t extend the cable beyond the 

red mark.

WARNING: 

On collection of proprietary carpet conditioning 

powders, plaster / concrete dust, it is 

recommended that the dust bag is changed. 

Some of the preparations contain substances 

which while left in the vacuum cleaner for 

extended periods could create damage. Many 

air fresheners, household deodorants, sprays 

and polishes contain highly inflammable gas 

propellants. Because of this it is particularly 

important that these products are used strictly 

in accordance with the relevant manufacturers 

instructions. It is essential that none of the above 

products are sprayed directly into the vacuum 

cleaner or any of the filters, hose assembly or 

dust chamber

 
Press the ON/OFF switch pedal to start the 
appliance. 

To rewind the power cable, press the rewind pedal 
with one hand and guide the cable with the other 
hand to ensure that it does not whip causing 
damage. 

Adjust thepower control knob to regulate the 
suction level required of the vacuumcleaner.

 
 
 
 
 
 
 

INSTRUCTIONS FOR USE

4.

35127 ULTIMA & MEGA IFU_V5.indd   5

3/10/08   2:41:16 PM

Summary of Contents for Mega Gen 3 U5010









Reviews: