[email protected] • 813.978.3700
- 3 -
Install Mounting Plate
1
Optional: Install Glare Guard Before Installation
Install Luminaire in Brick or Masonry Wall
If you choose, you can attach the
glare guard first before mounting
the fixture.
Use the screws and washers to
secure the glare guard onto the
fixture. Tighten with a
screwdriver.
Screw
Washer
Brick or
Masonry Wall
Mounting Plate
Barrell Nut
Determine the desired location for
each luminaire before construction
of the wall is started.
Insert the stainless steel mounting
plate (sold separately), in between
the layers of hardscape material.
If preferred, use an adhesive or
mortar (sold separately), to secure
the luminaire in place.
Install Luminaire
2
Mounting Plate
Glare Guard
Luminaire
Mounting Screw
Route the luminaire wire
through the wall to the main
low voltage supply cable using
standard masonry procedures.
A “V” shaped notch can be cut
into the hardscape material
to aide in wire management.
Attach the glare guard and
the luminaire to the stainless
steel mounting plate by using
mounting screws (ships with
mounting plate).
