[email protected] • 813.978.3700
Wire Connections
3
Strip both leads from the luminaire pigtail. Using two UL listed wire
connectors (sold separately), connect the leads from the luminaire to
the main supply cable leads.
* We recommend ace heat shrink style connectors for hardscape
connections.
Main Low Voltage
Supply Cable
Luminaire Wires
Wire Connectors
Adjust Lamp Direction
4
Set Screw
Lamp
Using an Allen wrench, loosen the set screws on the ends of the
lamp and then rotate the lamp to the desired direction. Always
tighten the set screws after adjustments.
Install Luminaire to Y Bracket
Determine Luminaire Location
1
Place the luminaire onto the
Y bracket using the rubber
washers and screws. Tighten
with a screwdriver.
Y Bracket
Luminaire
Screw
Rubber Washer
- 7 -
