INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
- 6 -
[email protected] • 813.978.3700
- 7 -
ROTATE
Install MR16 Bulb
6
Insert MR16 bulb with the correct
wattage and type marked on the
fixture label.
CAUTION: Do not exceed
maximum wattage marked on
luminaire label.
MR16 Bulb
Socket
Install Lens
7
Place the lens back onto the
fixture and rotate it until it is
secured properly.
Fixture
Lens
VOLT
®
MR16 Lusitano Spot Light
VAL-2003-4-BBZ
Remove the glare guard and the lens to expose the MR16 bulb and replace it
with the correct wattage and type marked on the fixture label. Then,
reinstall the lens and the glare guard.
IMPORTANT: MR16 bulb must be protected from moisture and dust at all
times. Always reinstall the lens and the glare guard when removed.
Install/Replace Lamp
Install Glare Guard
8
Install the glare guard back
onto the fixture and
secure with previously
removed set screw.
Fixture
Set Screw
Glare Guard
Using the provided Allen wrench,
loosen the knuckle and adjust the
fixture to your desired direction.
Once your desired direction is
achieved, tighten the knuckle
into place.
Adjust Lamp Direction
9
Fixture
Allen Wrench
Screw
