INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
VOLT
®
BuddyPro™ LED Puck Light
VHS-67XX-5-BRB
Lay out the supply cable to the transformer. Strip both leads from
luminaire pigtail. Connect leads from luminaire supply cable to
transformer (sold separately).
Fixture
Pigtail
Transformer
(sold separately)
Supply Cable
Fixture
1.5”D Hole
Lock Screw
Anchor
(optional)
Recessed Mounted
2
Wire Connections
3
Using a 1.5” core drill bit, drill hole at
your desired flat surface for recessed
mounted fixture. Attach fixture into the
drilled hole and secure with lock screws.
Note: Wall anchors are required for
certain installation conditions (e.g.
Brick wall, Concrete Wall, etc.) Mark on
the desired flat surface for anchors from
holes on the fixture. Remove fixture and
drill proper holes on the desired flat
surface and then insert anchors.
is-vhs-67XX-ver3.pdf
