INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
VOLT
®
Hardscape Puck Light
VHS-67XX-X-BRB
Lay the supply cable out from the transformer. Strip both leads from
the luminaire pigtail. Connect the leads from the luminaire supply
cable to the transformer (sold separately).
Pigtail
Transformer
(sold separately)
Supply Cable
1.5” Hole
Lock Screw
Anchor
(optional)
Recessed Mounted
2
Wire Connections
3
Using a 1.5” core drill bit, drill a hole in
the desired flat surface. Attach the puck
light into the drilled hole and secure
with the lock screws.
Note: Wall anchors are required for
certain installation conditions (brick
and/or concrete surfaces). Place a mark
on the surface where the holes are
located on the puck light. Remove the
puck light and drill proper holes on the
flat surface, then insert the anchors.
Puck Light
Puck Light
- 4 -