
38
•
Battery should be kept at least at 1.5m from any possible flammable substance
.
•
Maintain the battery; please full charging before storage, charging battery every 6 monthswhen
storing for a long time.
•
Don’t operate switch at storage.
17.
Tool indications and warning signals
17.1
Indication of charger
Li-Battery
LED
Battery capacity
Voltage
Three squares green
80%-100%
34 V <Vcc≤42 V
Two squares green
50%-80%
One squares green
30%-50%
One squares red
Below 30%
Vcc≤34 V
Charger
Indication
Situation
Red
Charging
Green
Charging finished
17.2
Warning tone of the battery
Warning
note
Interval
Warning
Frequency
Situation or Problem
1 time
0.3 second
No repeat
Indicate: start up and shutdown, small and big
blade mouth switch
2 times
0.3 second
10 repeats
Indicate: is charging or shear is not connected
well, please check if the nuts at both ends of the
shear and battery is connected firmly.
3 times
0.3 second
10 repeats
Indicate: open hall signal of stroke plate faults
Send the shear to Customer Assistance
4 times
0.3 second
10 repeats
Indicate: closed hall signal of stroke plate faults
Send the shear to Customer Assistance
4 short
note
0.1 second No repeat
The battery is used up. Please charge the
battery soon.
10 times
0.3 second
10 repeats
The scissor has worked for 100,000 times
already. Please remove the front cover, blade,
pin, lead screw and re-grease the connection
joints.
1 long
note
5 second
10 repeats
Scissor has worked for 500,000 times, and it
should be inspected and maintained fully.
Please contact your local dealer for servicing.