2
ServeWell
©
Hot Food Tables and SL Hot Food Tables Operator’s Manual
BEFORE YOU BEGIN
Parts List
Each Vollrath ServeWell
©
Hot Food Table includes the following:
Tools You Will Need
• #2 Phillips screwdriver
•
⁷⁄₈
" wrench
ASSEMBLY
NOTICE: Place cardboard or a drop cloth on the floor to protect the
work surface and the equipment during assembly.
1. Remove all the components from the shipping container.
2. Place the well assembly on the floor with the well openings facing
down and bottom of the pan facing up.
Attach the Drain Valves
1. Assemble the drain valves to the tailpieces below each well. Hand-
tighten until snug.
NOTICE: Do not use tools to assemble the drain valves. Using
tools may cause the drain assembly to crack, resulting in
water leaks.
Attach the Legs
ServeWell Tables without Plate Rest Brackets
For each leg:
Remove the four corner screws from the pan. Position
the leg against the pan. Re-insert and tighten the screws to attach the
leg. Repeat for each leg.
ServeWell SL Tables with Plate Rest Brackets
For each back leg:
Remove the four corner screws from the pan.
Position the leg against the pan. Reinsert and tighten the screws to
attach the leg.
For each front leg:
Remove the four corner screws from the pan.
Position the leg against the pan. Position the bracket in front of the leg.
Reinsert and tighten the screws to attach the bracket and leg to the
front of the pan.
Part
Quantity
Legs
4
Feet
4
Washers
4
Nuts
4
Shut-off Faucet
1 per well
Bottom Shelf
1
Poly Cutting Board
(Not included with SL tables)
1
