5
BEFORE YOU START
REMOVING COVER
• Remove your new LaundryPure 2 0 from its packaging
• Inspect the unit for any signs of shipping damage
NOTE:
Your LaundryPure 2 0 unit was factory tested It is normal for some residual water to still remain in the unit as a result of these tests
Screws
1 Remove the two (2) cover screws located
on the bottom of the unit
2 Remove the two (2) screws (not shown) along
the top of the LaundryPure 2 0
3 To remove the cover, pull the top away from the
unit, then lift off the cover
